RAP-5WN
|
|
ARUBA Remote Access Point RAP-5WN. The RAP-5WN is a powerful platform for the multi-user small branch office or for power users who work from a home office. |
The RAP-5WN is a high-performance indoor Remote Access Point platform with multiple access and uplink technologies available. The RAP-5WN features wired and wireless connectivity and security, the ability forward traffic based on policy, user centric security, and backup connectivity over cellular networks make this platform ideally suited to the always-on office.
This multi-function Remote Access Point provides wired LAN connectivity on four 10/100 ports that can each be configured with a unique set of policies for secure user access and traffic forwarding. The RAP-5WN features wireless LAN capabilities on multiple SSIDs, air monitoring, and wireless intrusion detection and prevention over the 2.4GHz and 5GHz bands (802.11a/b/g and 802.11n). The RAP-5WN provides a USB port for connection to a 3G modem for cellular backup of the WAN link.
The Remote Access Point works in conjunction with Aruba's Multi-Service Controllers to deliver high-speed, secure network services to your remote locations. The RAP-5WN operates over any available WAN or LAN transport connection and can be provisioned by the end user with no IT interaction
| Specifications |
| High-performance, wired and 802.11n wireless, remote branch office & fixed teleworker applications, high-performance SecureJack ports, indoor use. |
| Wired Operating Modes |
| 10/100 Ethernet |
| User authentication - 802.1X, Captive Portal, Mac Authentication, or Open Access |
| Policy based forwarding for local resource access |
| Wireless Operating Modes: |
| Multi-service 802.11a/n or 802.11b/g/n WLAN |
| 802.11a/b/g/n air monitor |
| Hybrid combination of WLAN/AM |
| Remote access point |
| Configurable to support 802.11n HT 20/40 channels or mixed-mode deployment IEEE 802.11a/b/g/n |
| Radios: |
| Single Radio - software configurable to support 2.4GHz or 5GHz |
| RF Management: |
| Automatic transmit power and channel management control with auto coverage hole correction via Adaptive Radio Management (ARM) |
| Wireless Radio Specifications |
| AP type: 3x3 Multiple-In, Multiple-Out (MIMO) |
| Supported Frequency Bands (country-specific restrictions apply): |
| 2.400 - 2.4835 GHz 5.150 - 5.250 GHz 5.250 - 5.350 GHz 5.470 - 5.725 GHz 5.725 - 5.850 GHz |
| Available Channels: Controller-managed, dependent upon configured regulatory domain |
| Supported Radio Technologies: |
| 802.11b: Direct-Sequence Spread-Spectrum (DSSS) 802.11a/g/n: Orthogonal Frequency Division Multiplexing (OFDM) 802.11n: 3x3 MIMO with 2 spatial streams |
| Supported Modulation Types: |
| 802.11b: BPSK, QPSK, CCK 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM |
| Transmit Power: Configurable in increments of 0.5 dBm |
| Association Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 with automatic fallback |
| Interfaces |
| Network: 1 x 10/100/1000Base-T Ethernet (RJ45), Auto-sensing link speed and MDI/MDX, 4 x 10/100Base-T Ethernet (RJ45), Auto-sensing link speed and MDI/MDX |
| Power: 1 x DC power connector |
| USB: 1 x USB 2.0 (type A connector) |
| Maximum Power Consumption: 12 Watts |
