Aruba AP-93H Access Point
|
|
Aruba AP-93H Access Point The multifunctional enterprise-class AP-93H 802.11n access point (AP) easily mounts to an Ethernet wall plate and uses the existing structured cabling system to provide secure wired and Wi-Fi network access in dormitories, classrooms, hotels, medical clinics and multitenant environments. |
Capable of delivering high-performance Wi-Fi services to multiple rooms, the AP-93H greatly simplifies RF coverage planning and significantly reduces wireless LAN (WLAN) deployment costs. The AP-93H is built to provide years of trouble-free operation and is backed by a limited lifetime warranty.
Delivering wire-like performance at data rates up to 300 Mbps, the AP-93H features a single 2×2 MIMO 2.4-GHz or 5-GHz dual-band radio with internal antennas. For wired connectivity, it features four 10/100BASE-T switch ports, an additional pass-through RJ-45 port and a 10/100/1000BASE-T uplink port that can operate from an 802.3af power-over-Ethernet (PoE) source or a 12-volt DC power supply.
Working with centralized Aruba Mobility Controllers, the AP-93H delivers secure, high-speed network services that move users to a "wireless where possible, wired where necessary" network access model. The network can then be rightsized by eliminating unused Ethernet switch ports, which reduces operating costs.
The AP-93H leverages wireless as a primary connection with speed and reliability comparable to a wired LAN. High performance is maintained using channel bonding, block acknowledgement and MIMO radios, while advanced antenna technology increases range and reliability.
The AP-93H also supports Adaptive Radio ManagementTM and spectrum analysis to maximize client performance and mitigate RF interference across the 2.4-GHz and 5-GHz radio bands.
In addition to wired and wireless connectivity, the multifunctioning AP-93H supports a variety of operating modes, including wireless LAN (WLAN) access with part-time air monitoring, dedicated air monitoring for wireless intrusion protection and spectrum analysis, Remote AP (RAP) functionality and secure enterprise mesh.
| Application: |
| Indoor single-radio 802.11n dual-band AP for dormitories, classrooms, hotels, medical clinics and multitenant environments. |
| Operating Mode: |
|
| Radios: |
| Software-configurable single radio capable of supporting 2.4 GHz or 5 GHz 802.11n capable, implementing 2x2 MIMO with 2 spatial streams, providing up to 300 Mbps data rate |
| RF Management: |
| Automatic transmit power and channel management control with auto coverage-hole correction via Adaptive Radio Management (ARM) Spectrum analysis remotely scans the 2.4-GHz and 5-GHz radio bands to identify sources of RF interference. This provides visibility into non-802.11 RF interference sources and their effect on 802.11 channel quality. |
| Advanced Features: |
| Integrated RAP, secure enterprise mesh point or portal, wireless intrusion detection and prevention Integrated Trusted Platform Module (TPM) for secure storage of credentials and keys |
| Wireless Radio Specifications: |
| AP type: Single radio, dual-band 802.11n indoor Supported Frequency Bands (country-specific restrictions apply): 2.400 - 2.4835 GHz 5.150 - 5.250 GHz 5.250 - 5.350 GHz 5.470 - 5.725 GHz 5.725 - 5.850 GHz Available Channels: Controller-managed, dependent upon configured regulatory domain Platform supports Dynamic Frequency Selection (DFS) to allow optimal usage of available RF spectrum Supported Radio Technologies: 802.11b: Direct-sequence spread-spectrum (DSSS) 802.11a/g/n: Orthogonal frequency division multiplexing (OFDM) 802.11n: 2x2 MIMO with 2 spatial streams Supported Modulation Types: 802.11b: BPSK, QPSK, CCK 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM Transmit Power: Configurable in increments of 0.5 dBm Maximum (aggregate) Transmit Power: 2.4 GHz: 21 dBm (limited by local regulatory requirements) 5 GHz: 21 dBm (limited by local regulatory requirements) Maximum Ratio Combining (MRC) for improved uplink RF performance Cyclic Delay Diversity (CDD) for improved downlink RF performance Association Rates (Mbps): 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: MCS0 - MCS15 (6.5 Mbps to 300 Mbps) 802.11n High-Throughput (HT) Support: HT 20/40 802.11n Packet Aggregation: A-MPDU, A-MSDU |
| Power: |
|
48 volts DC 802.3af Power over Ethernet Maximum power consumption (worst case): When powered from PoE: 9 watts
|
| Antenna: |
Integrated, omni-directional antenna elements (supporting up to 2x2 MIMO with spatial diversity): 2.4 GHz/2.5 dBi 5 GHz/4.0 dBi |
| Interfaces: |
| Network: 1 x 10/100/1000BASE-T Ethernet (RJ-45), auto-sensing link speed and MDI/MDX 4 x 10/100BASE-T Ethernet (RJ-45), auto-sensing link speed and MDI/MDX 1 x passive RJ-45 pass-through interface Power: 1 x DC power connector Other: 1 x RJ-45 serial console interface |
| Mounting: |
| Mount plate, supporting various worldwide electrical wall box standards. |
| Mechanical: |
Dimensions/weight (unit, with mount bracket): 130 mm x 143 mm x 35 mm 425 g Dimensions/weight (shipping): 200 mm x 170 mm x 58 mm 580 g |
| Environmental: |
|
Operating: Temp: 0° C to +40° C (+32° F to +104° F) |
| Regulatory: |
| FCC/Industry of Canada CE Marked R&TTE Directive 1995/5/EC Low Voltage Directive 72/23/EEC EN 300 328 EN 301 489 EN 301 893 UL/IEC/EN 60950 EN 60601-1-1, EN60601-1-2 |
| Certifications: |
| CB Scheme Safety, cTUVus Wi-Fi certified 802.11a/b/g/n |
| Warranty: |
| Aruba Limited Lifetime Warranty |
| Minimum AOS Version: |
| 6.1.3.0 |
| Product Ships With: |
|
AP-93H access point |
